
A landscaper does not load like a builder. A single day can involve heavy soil, bulky but light hedge cuttings, a mower and a brushcutter. A tipper truck well equipped for landscaping takes these three needs into account: payload for the soil, volume for the green waste, and covered space for the machines and tools. Here is how to think it through.
1. Soil, cuttings and green waste: different needs
Two loads that fill the same body can have very different weights:
- soil, sand and stones are heavy: the permitted weight is reached long before the body is full, especially if the soil is wet;
- cuttings, leaves and green waste are light and bulky: the body fills up by volume long before reaching the permitted weight.
That is the whole challenge of equipping a landscaper’s tipper: staying under the permitted weight with soil, while having enough volume for green waste. To estimate the volume to load for each material, see our article on sand, gravel and soil.
2. Keep a suitable payload
On a truck with a gross vehicle weight (GVW) of 3.5 tonnes, every piece of equipment added uses up payload: extension sides, toolboxes, tool holders, and of course the crew on board. The Road Vehicles (Construction and Use) Regulations 1986 prohibit using a vehicle on a road if any of the weights shown on its plate, the GVW or the weight on an axle, is reached or exceeded (regulation 80).
Before adding options, do the calculation: GVW minus chassis cab, equipped tipper body, occupants, fuel and permanent tools. What remains must cover your heaviest loads of soil. If you often take a crew, the choice of cab also matters: see our article on choosing between a single and a double cab.
3. Keep tools and materials apart
Machines and cutting tools do not travel loose with the soil:
- a toolbox (behind-cab, PVC or in-body) protects small tools, secateurs, blades and consumables;
- a tailored tool holder holds shovels, rakes and handles;
- machines (mower, brushcutter, leaf blower) must be blocked and secured to designated anchor points.
A net or a tarpaulin is not enough to hold a mower: it covers, it does not restrain. Regulation 100 of the Road Vehicles (Construction and Use) Regulations 1986 requires the load to be secured so that neither danger nor nuisance is likely to be caused.
The fuel for the machines is subject to specific transport rules: this subject should be checked separately, and it is not covered here.
4. Extension sides, sheeting and trailer
Extension sides increase the height of the body, and therefore the volume available for green waste. They do not increase the permitted weight and they add their own weight. With extension sides, the risk of overloading increases as soon as you load soil: you fill higher, so heavier.
Sheeting or a net stops leaves and branches blowing onto the road. Its fastenings must not stick out beyond the vehicle or drag on the ground.

Tarpaulins and nets: the strength of the Bourgoin group. For sheeting and nets, CIL has a real advantage: it is part of the Bourgoin group, one of the established names in tarpaulins and technical textiles for commercial vehicle bodywork and industry since 1906. Leaves, branches, green waste: we can offer you materials, shapes and structures of tarpaulin or net, and adapt them fully to your tipper and to what you carry.
A trailer can carry a mini digger, a ride-on mower or extra green waste. It can change the licence you need depending on the weights involved: check your case before hitching up with our licence simulator, as well as the towing capacity of your chassis.
5. Prepare your project with CIL
The CIL 3.5 t tipper offers several items of equipment useful for landscaping: steel or aluminium side and rear extensions, tarpaulin or net, behind-cab toolbox, PVC toolbox, in-body toolbox, tailored tool holder, towing pack. Their availability and compatibility with your chassis are confirmed in the quote.
For an accurate proposal, prepare:
- the materials you carry, and how often (soil, green waste, stones);
- the machines and tools to be carried;
- the number of people carried;
- your chassis, or the one you are considering;
- any use of a trailer.
Prepare your list of materials, your crew and your chassis: ask CIL for a quote for your tipper project. Ask for a quote for my tipper project
Frequently asked questions
Do extension sides let you carry heavier loads?
No. They increase the volume of the body. The permitted weight is still set by the GVW, and the extension sides add their own weight.
Can you carry a mower in the tipper body?
Yes, provided it is blocked and secured to designated anchor points. A net alone is not enough.
Does wet soil weigh more?
Yes, water adds weight. A body full of wet soil can exceed the payload before it is full.
Should green waste be sheeted?
Whenever it could blow away or fall onto the road, yes. The load must not become a source of danger.
Updated 25 October 2026
A project? Need a
tipper? A question?
Write to us or call us: we will get back to you quickly.
Request a quote