+33 2 37 45 01 66 Become a dealer Request a quote

CIL

Tipper 3.5 t

A real site tipper. Built to last.

  • 3 mmSteel floor
  • 47.7°Tipping angle
  • 450 kgUnladen weight
  • Driving licence BChassis GVW 3,500 kg
CIL 3.5 t tipper, three-quarter front view

The promise

It’s made to work. Every day.

Loading, driving, tipping, non-stop: a professional’s working day means repeated effort. CIL designed this tipper around real-world use, together with professionals and for them.

  1. 01

    A floor designed to take the load

    A robust 3 mm steel floor, supported by genuine side members in 120 × 60 mm tube, 3 mm thick.

  2. 02

    Universal rear door, in site mode

    A genuine 40 × 2 mm square-tube frame. Reinforced hinges and fixings for easy, reliable operation. Made from quality steels to withstand every loading method.

  3. 03

    Reinforced, innovative dropsides

    Light and strong. Reinforced folded design: 2 mm with closed folds, double thickness (2 × 2 mm) where stresses are highest. Smooth inside, so no material gets trapped. 3 mm reinforcing angles: very high rigidity.

Simple actions, from the first to the last load.

At CIL, a handle is never a detail: its shape and locking make every action easier. Repeated hundreds of times a year, these simple actions are what CIL quality is made of.

Construction

From floor to handle. Every part has its purpose.

At CIL, every component is designed for its function: type and thickness of steel, folded or doubled sheet, tube or profile. These choices bring together fifty years of experience in industrial bodybuilding.

CIL tipper rear view, numbered callouts
  1. Universal rear door40 × 2 mm square-tube frame, reinforced hinges and fixings.
  2. Door lever20 mm solid round bar sheathed in rubber.
  3. Reinforced dropsides2 mm steel with closed folds: double thickness where stresses are highest, smooth inside, 3 mm reinforcement.
  4. Ladder rackReinforced and bolted in place: it comes off quickly.
01

A genuine chassis under the floor

Two side members and two crossmembers in rectangular tube, reinforced with folded sheet-metal profiles. A heavy-truck design, adapted to a light commercial vehicle.

02

An optimised subframe

Strength without surplus weight: 4 mm folded sheet-metal side members, up to 12 mm at the pivot clevises and 15 mm at the cylinder bearings.

03

Controls designed for the user

At the rear, the universal rear door lever, in 20 mm solid round bar sheathed in rubber, gives comfort, force and precision.

Rear face of the CIL tipper

Removable stanchions, reinforced ladder rack.

CIL stanchions, in 80 × 40 × 2 mm steel tube, are easy to remove. Bolted in place, the front ladder rack comes off quickly.

Tipping

It lifts hard. Without working at its limit.

A tipper is not judged by its first lift, but by all the ones that follow.

  1. 3-stage cylinder Ø110/90/75/60 One of the largest cylinders on the market.
  2. Power pack 12 or 24 V · 200 bar Powerful power pack. High-displacement pump.
  3. The ideal angle 47.7° Precise setting of the maximum tipping angle.
  4. Electric control 4 m Reinforced harness and impact-resistant control box.
0.0°Tipping angle

Scroll to raise the tipper

Tipping kinematics · illustration

CIL tipper fully raised
Tipping kinematics — technical diagram

Tipping kinematics

Hinges built to last

Ø30 mm solid pins, 12 mm hinge supports and 15 mm cylinder bearings. Accessible greasing points.

It comes down true. No jolts.

Two 6 mm steel guides re-centre the body every time it comes down. Rubber pads cushion its return.

A real prop. More than an accessory.

A genuine mechanical safety prop holds the body in the raised position, so you can work underneath the tipper.

At CIL, toughness isn’t a promise. It’s there to see.

Right down to the most exposed equipment: high-strength polypropylene mudguards and side guards reinforced with Ø42 mm bent tubes.

Technical data

See the construction for yourself. All the figures are here.

Dimensioned drawing of the CIL 3.5 t tipper, side view

Body

Floor
3 mm steel, two sheets butt-welded, bevelled
Side members
tube 120 × 60 × 3
Cylinder crossmember
tube 100 × 100 × 4
Dropsides
reinforced, folded, smooth inside, height 350 mm, 2 mm steel doubled by folding, 3 mm reinforcement
Rear door
folded, closed folds, height 444 mm, 2 mm steel doubled by folding, 3 mm reinforcements

Subframe

Side members
4 mm profile, multi-position drilling
Body guides
6 mm steel
Supports
12 mm steel body pivot, 15 mm steel bearing
Mounting brackets
6 mm steel

Hydraulics

Control
remote 2-function control box, 4 m harness
Cylinder
3-stage telescopic Ø110/90/75/60, 880 mm stroke, 220 bar
Power pack
12 or 24 V, 200 bar, 8 L tank

Dimensions

Overall length
3,307 mm
Internal length
3,047 mm
Overall width
1,980 mm
Internal width
1,900 mm

Weight

Unladen weight
450 kg
Chassis GVW
3,500 kg
Driving licence
B

Options

  • Simple rear tailgate (price reduction)
  • Towing pack
  • Behind-cab toolbox
  • Custom toolbox shelving
  • Tool holder tailored to the customer
  • Steel/aluminium side/rear extensions
  • PVC toolbox
  • In-body toolbox
  • Crane pack
  • Tarpaulin or net
  • Your company name on the tipper and truck

Specifications subject to change. Photographs, colours and diagrams are not contractually binding.

Finish

Demanding preparation. Two finishes, your choice.

Every part is shot-blasted, then phosphated. Choice of finish: two-component polyurethane paint or oven-cured powder coating. Any colour, at no extra cost.

Request a quote

Documentation

The catalogue, ready to download.

CIL network

Offer CIL to your customers.

Bodybuilders, dealers, distributors: join the CIL tipper dealer network. Fill in the form and the CIL team will get back to you.

Du solide, simplement.

Contact us