+33 2 37 45 01 66 Become a dealer Request a quote

Advice and news

Advice

Do employees need training to use a tipper truck at work?

Deux artisans en équipement de protection discutent à côté d’un camion équipé d’une benne CIL blanche (mise en situation)

Handing a tipper truck to an employee is not just a matter of checking their driving licence. They must be able to drive the vehicle in the intended conditions and use its equipment with an understanding of the risks. For a building or landscaping business, an organised handover sets good habits from the start.

Distinguish road driving from using the tipper

The licence required depends on the truck and any trailer. On its own, it is not training in the tipping controls, the locking devices or abnormal situations.

Even an experienced driver has to get to know new equipment. The position of the controls, the door opening sequence and the unloading conditions can vary from one vehicle to another. The instructions for the configuration in use are therefore the starting point.

What are the information and training duties?

Regulation 8 of the Provision and Use of Work Equipment Regulations 1998 (PUWER) requires adequate health and safety information and, where appropriate, written instructions on the use of work equipment, including the conditions and methods of use and foreseeable abnormal situations. Regulation 9 requires adequate training, and regulation 13 of the Management of Health and Safety at Work Regulations 1999 requires training to be provided when new work equipment is introduced or existing equipment changes, and to be repeated periodically where appropriate.

In addition, the Approved Code of Practice that accompanies PUWER, published by the Health and Safety Executive (HSE), states that self-propelled work equipment should only be driven by workers who have received appropriate training in driving it safely; equipment used for lifting comes under its own regulations (LOLER 1998). The provisions that apply to the exact equipment and its uses should be identified, rather than applying the same answer to every equipped truck.

Is a specific certificate compulsory?

Do not confuse a driving licence, safety training, an operator certificate and the employer’s authorisation to use equipment. These do not play the same role. Having a tipper body does not mean that a « tipper truck certificate » is systematically required: the regulations do not set a certificate specific to tipper bodies.

Conversely, the absence of a specific certificate does not mean the user need not know the equipment. Adding a crane or other equipment can change the requirements to be examined. The business must reason on the actual configuration and have particular cases checked.

What should the handover cover?

A useful demonstration follows the daily work: pre-departure check, preparing the load, choosing the area, using the controls and returning to the road-going position. It must also explain when to stop an operation.

The employee must know who to tell if a lock does not work, if a leak appears or if the tipper moves in an unusual way. Asking them to improvise a repair on site does not replace an instruction.

Keep a record of the points covered, the equipment concerned and the people who received the handover. This record helps organise refreshers when the vehicle, the equipment or the working method changes.

Plan the documents from the purchase stage

When looking at the CIL tipper, say how many people will use it. Ask for the instructions and the documents available for the proposed configuration.

Talk to CIL about your tipper project to prepare equipment that suits your crew and the way you work. The terms of any training service must be confirmed separately.

Frequently asked questions

Does an experienced driver need to learn the new tipper?

Yes. Experience does not replace the instructions specific to the equipment.

Is a signature enough to train a user?

A written record does not replace an explanation that has been understood and a proper handover.

Do the explanations need to be repeated?

They must keep pace with changes to the equipment and to working situations.

Does an extra accessory change the analysis?

It can introduce new risks and new requirements to be checked.

Updated 25 October 2026

A project? Need a tipper? A question?

Write to us or call us: we will get back to you quickly.

Request a quote

Du solide, simplement.

Contact us