
The payload of a 3.5 tonne tipper truck depends on the vehicle as actually equipped. Two trucks that look alike can offer different capacities depending on their cab, their tipper body and their accessories. To plan a job, you need to reason from the weight available, not just from the volume you can see.
The 3.5 tonnes include the whole vehicle
The gross vehicle weight (GVW), also called maximum authorised mass, is the maximum permitted weight of the loaded truck. It includes the chassis cab, the tipper body, the equipment, the fuel, the people and the goods. An empty tipper body therefore does not mean 3,500 kg available for rubble.
The Road Vehicles (Construction and Use) Regulations 1986 (regulation 80) prohibit using a vehicle on a road if any of the weights shown on its plate, gross weight or axle weights, is reached or exceeded.
Work out the remaining capacity before loading
To organise a journey, a practical method is to weigh the truck ready to go: occupants on board, tools loaded and usual equipment fitted. The difference between the GVW and this weight gives the capacity left for anything not yet on board.
Here is a fictitious example:
| Item | Weight |
|---|---|
| Truck GVW | 3,500 kg |
| Truck weighed ready to go, before materials | 2,650 kg |
| Capacity left for materials | 850 kg |
The 850 kg is not a specification of the CIL tipper. It only illustrates the calculation. If a person or a tool was already on board when the truck was weighed, do not subtract its weight a second time.
Do the calculation with your own figures
Our payload calculator does this calculation for you: enter the GVW, the weight of your truck, the crew and the tools on board. It gives you the weight available, then the volume you can order for each material.
Why equipment changes the result
A toolbox, extension sides, towing equipment or extra kit all add weight. They can be useful for the job, but their weight has to be taken into account when choosing the vehicle.
Before asking for a quote, list what will travel with the truck every day: how many people, which tools and which accessories? This list allows a fairer comparison between the configurations offered. The vehicle’s documents and plate give important information, but a quick calculation from those figures alone does not replace checking the vehicle as actually equipped.
Respect the axle loads too
A truck can stay below its GVW while overloading one axle. This is the risk, in particular, with a load concentrated too far towards the rear. You therefore need to follow the manufacturer’s instructions on load distribution and, where necessary, check the axle weights.
The suspension and the tyres are not a weighbridge. A load that looks fine does not prove that the truck is within its limits.
Match deliveries to the job
When the planned load exceeds the remaining capacity, the organisation has to change: quantity delivered, an extra trip or another suitable means of transport. Adding a trailer requires a separate check of the licence and of the technical capacities.
The CIL tipper is looked at as part of this whole picture: chassis, crew and use. Tell CIL about your project to ask for a quote, giving details of your materials and your usual equipment.
Frequently asked questions
Does a bigger tipper body increase the permitted load?
No. Volume and permitted weight are two different limits.
Do the occupants count towards the total weight?
Yes, just like the tools and equipment on board.
Can you go by the height of the heap?
No. The weight depends in particular on the type and condition of the materials.
Do all CIL tippers offer the same payload?
The capacity has to be worked out for the complete truck and its configuration. No single figure should be assumed.
A project? Need a
tipper? A question?
Write to us or call us: we will get back to you quickly.
Request a quote