Pro calculators
Roofing
How much does my roof weigh?
Tiles or slates: the weight to remove and the number of trips with your CIL tipper.
1Your roof
Area of the roof slopes, not the footprint.
With the pitch, the calculator works out the area of the roof slopes.
Roof area = footprint ÷ cosine of the pitch.
Indicative average from manufacturers’ data sheets: the exact weight depends on the model. Slates: about 27 kg/m² at 3.5 mm, much more for thick slates.
Battens, sarking boards, insulation: enter their weight if you are removing them too.
Tiles or slates thrown in loose: indicative average. Stacked, they take up less space.
2Your tipper
Your available payload, with crew and tools on board. To find it: the “How much can I load?” calculator.
To see whether weight or space is the limit.
Weight to remove
— t
With your tipper
—
Indicative result. The weight per m² depends on the model of tile or slate and on its overlap: refer to the manufacturer’s data sheet, and have your first load weighed if in doubt.
The number of trips respects the weight you entered: never exceed your truck’s maximum authorised mass, nor the permitted load on each axle. Roofing installed before 2000 (corrugated sheets, fibre-cement slates) may contain asbestos: asbestos was banned in the UK in 1999, and its removal and disposal follow specific HSE rules (asbestos waste is hazardous waste). Check before loading it.
What payload can a 3.5 tonne tipper truck carry?
Discover the CIL tipper
The new 2027 model in picturesLowered, raised, emptied: the CIL tipper from every angle.See the pictures
An oversized cylinder3-stage telescopic Ø110/90/75/60, up to 47.7° tipping angle.See the tipping
See the build quality in the specsDimensions, thicknesses, hydraulics: the full CIL tipper data sheet.See the technical dataA project? Need a
tipper? A question?
Write to us or call us: we will get back to you quickly.
Request a quote